Thursday, September 21, 2023
HomeEditor PicksWhat Do I Need To Make Custom Shoes

What Do I Need To Make Custom Shoes

- Advertisment -

Tulip Dimensional Fabric Shoes Paint:


Prices pulled from the Amazon Product Advertising API on:

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.

Tulip has always understood what people need in terms of paints and crafts, and that is why they are one of the most demanded brands of all time. No matter if you ask a toddler or a professional in arts, no one will deny the companys sheer popularity. Thats why they have one of the most popular shoes spray paint kit in the industry.

Learn More About Our Custom Printshop

We use a patented process that includes modified Direct-to-Garment printers that use a full-spectrum CMYK + White colour process inking system, allowing us to print vibrant images and graphics on both black and white canvas! Direct-to-Garment printing holds up better than traditional screen printing techniques, it will not crack or peel or bleed over time and is water-resistant. We love to tell our customers that the print will last as long as the shoes themselves!

Assembly Of Custom Shoes

After the glue is applied to the upper and sole of the shoe its best to use a small press to make sure the bond is very strong. A bench top shop press is not expensive and can generate enough force to press the parts together.

The final must have piece of equipment for a small custom shoe factory may be the most expensive. This is a heavy duty channel stitching machine used to secure the upper to the shoe sole. This machine is very powerful and can easily drive the needle and thread through the leather and rubber.

Because sole bonding with shoe cement is difficult for a mini factory, this machine insures the shoe bottom does not separate from the upper. This machine has a long arm that can reach inside the shoe allowing the stitches to secure the rubber and upper together.

To See this shoe factory equipment in action see our new shoemaking book chapters 8, 9, 10.

Don’t Miss: Is 4e Wide

Vinyl Stencils Cutout By Machine

If you are going to be making multiple customs that uses stencils or want to make stencils that arent being sold, you will want to buy a vinyl cutting machine. The most popular model is the Silhouette Cameo. A machine will cost you about $200 and each 10 foot roll of vinyl is about $9. Amazon is recommended for buying both of these items. Some basics about how to make your cutouts in the Silhouette program is here. Another video by Sierato here.

Can I Wear My Orthotics In Any Shoe

custom shoe bts boy with luv inspired custom shoes by ...

While many shoes are compatible with your custom foot orthotics, there are some styles that are not. Occasionally the volume of the interior of the shoe is simply too shallow to accommodate your foot and your orthotic. This is commonly found in dress shoes. In some cases, changes to the orthotic itself may be an option, but with shoes like ballet flats, pumps or other low volume footwear, orthotics may be incompatible. In these cases, discuss the use of these shoes with your Pedorthist.

Generally speaking, your Pedorthist will advise you on how and when you should be wearing your orthotics throughout your treatment. This may change over time, as you heal from an injury or as your condition changes over time. This is one of many reasons it is important to check in with your Pedorthist yearly to ensure that your treatment goals are being met and that your orthotics are still performing well for you. This is not to say you need to replace your orthotics yearly, but rather have them re-evaluated annually.

Also Check: Dhgate Review Shoes

The Expense Of Custom Shoes

Custom shoes can get very pricey very quickly, so when starting the process of shopping for custom shoes, whatever the reason, you should have a bit of money saved up and ready.

Prices differ depending on what reason you need custom shoes, but you can usually find something in your price range if you come into the process aware of what you are doing and what products you do and dont want.

Putting Finishing Touches On Your Creation

  • 1Waterproof your shoes with a sealant spray. A leather-based shoe will own with its own natural waterproofing abilities, but you’re going to want to do everything you can to make sure water isn’t able to get in. Getting a relatively inexpensive sealant spray and give your shoes a thorough going-over is a smart idea, especially if you live in a wetter part of the world. XResearch source
  • 2Add decorative touches to your shoes. Let’s face it most of the time you’re making something from home, it’s because you want to put your own unique spin on it. You have plenty of chance to do so even after the shoe is made. XResearch source
  • Taking a leather paint and adding an inventive design to the sides of the shoes is a fun and effective way to add style to your creation. XResearch source
  • There are countless ways you can stylize your shoes. Look online for some ideas if you’re in need of inspiration. XResearch source
  • 3Take them for a test walk! Now that your spiffy creations are finally finished, it’s time for the defining moment of trying them on and putting them to use. Try walking down the hallway or the street and get a hang for the way they feel. Are they comfortable? Do you think they could keep out water if you accidentally stepped in a puddle? If this is your first time making shoes, it’s perfectly normal for there to be issues. If you’re not satisfied with the end result, you can always put the expertise you’ve gained to good use and make another pair. XResearch source
  • Recommended Reading: Does Dhgate Sell Authentic Stuff

    What Materials Do I Need

    To get started, you need to grab the right materials — it’s not as simple as just grabbing some paint and brushes. You also need the right tools to prep and protect the shoe.

    After you get your materials together, it’s time to learn how you can put them to use. You can customize more than just sneakers.

    Why Should You Sell Custom Shoes Online

    FULL SUPPLY LIST – Everything you need to Start Customizing Shoes
    All over print custom shoes

    Make bold fashion statements with unique custom designs that are guaranteed to catch everyone’s eye.

    No minimum order required

    Create and sell as many pairs as you want. We can custom-image one-offs to dozens of shoes in one run.

    Print providers in USA and China

    Best print providers in the world based on production time and price. And ordering from China means shipping for as little as $1.20. Yay!

    Read Also: What 2e Shoe Size Mean

    Get The Style You Want

    The benefit of wearing custom shoes goes beyond function there is form as well. You are an individual with your own style, your own preferences, and own taste. You should be able to express your individuality from your haircut down to your bespoke shoes. With custom-made shoes you can have the color, textures, leather, style, sole, and insole you want. There is not detail overlooked, and you are in control.

    Airbrushing Sealant To The Sneakers

    The sealant will help to seal your paint to the leather, as well as ad a nice gloss to your paint. I generally will airbrush at least 3 coats of sealant in 45 minute intervals. If you want your shoes glossier, you can spray/paint more coats. The Angelus brand sealant I use comes in 3 different choices: low, mid and high gloss.Again, you can paint the clear sealant on, but we choose to airbrush to minimize brushstrokes.After the sealant is applied to your custom kicks, the paint will be protected. If they get dirty, they are easier to clean than if they were brand new. Just take soap and water on a clean rag and give it a once over.Allow the sealant to dry for at least 24-48 hours before wearing.

    Also Check: What’s The Best Thing To Clean White Shoes With

    Custom Designed Bespoke Or Custom

    • Buy the specific shoe cleaner as directed by the maker of your shoes
    • Only clean according to the designers instructions never use abrasive and harsh chemicals or brushes
    • Avoid wearing your shoes in inclement weather
    • Make sure you know how to protect them from the elements
    • Take care when putting your shoes on and storing them. Dont allow them to be crushed or flattened as it can damage the design and overall shape.
    • Purchase a shoe tree. This helps your shoe keep its shape, as well as the cedarwood absorbing smells and moisture that could damage the finish.
    • Get into a routine with your polishing. This is the best way to keep your shoes looking like new
    • Swap out your soles regularly. Depending on how often you wear them, your soles will wear down and no longer be as comfortable as when you first got them.
    • Replace your laces regularly to keep looking nice and help keep that tight fit.

    The Details /clean Up

    "  LV Slime Green "  Custom Shoes

    This is a picture of after the blue has been sprayed and dried.At this point all is left is the details, this is what makes a custom pair of AF 1’s go from “eh”, to”damn!!! Take notice that there are still small parts around where the sneakers were masked that need to be painted, as well as the inside edges of the sections that need to be painted /or cleaned up from overspray.Use the fine line brush and be very patient when doing this-you do not want to get paint on places where its not supposed to be. I used to actually use a flat razor to “paint” the edges, also, but since have gotten a lot more proficient with a fine line brush. If you happen to get paint where you dont want- quickly use a clean rag or q-tip with water or nail polish remover on it and carefully dab the paint.

    Don’t Miss: Is Dhgate Legit For Shoes

    Custom Shoes What Suits You And Your Pocketbook

    You may still wonder whether custom orthotics, custom design, and bespoke shoes are worth it. Well, are they? Realistically, this answer will differ from person to person, depending on their needs, wants, likes, and dislikes. If you are a picky person, or someone with sensitive feet, you will probably tell the difference between traditional, mass-produced shoes, versus custom orthotics or bespoke shoes.

    Paints And Primer / Preparer

    Well first go over the supplies needed and then the step-by-step instructions.

    For Canvas or Mesh Surfaces

    Use these two products combined .

    You do not need to use any other products to prepare a canvas or mesh surface.

    Alternate Materials

    Before Angelus Leather Paints were available, we created our painted canvas shoes with these items:

    • Acrylic primer | All-purpose wall painting primer works great but you have to apply thin coats. You can also use Gesso .
    • Acrylic paints | Golden is top notch quality goes on beautifully. You can also use any acrylic paints sold at craft shops such as Decoart, Martha Stewart, Folk Art, artists acrylics, or acrylic wall paint.
    • Acrylic Paint Thinner | Thin layers are key to preventing cracking and getting a good end result. Acrylic Paint Thinner is the same stuff used with airbrushing.

    For Leather Surfaces

    Leather surfaces must be prepared first with a product like Angelus Leather Preparer and Deglazer before they are ready to paint. Read more in the step-by-step instructions .

    Vinyl requires 3 steps before it is ready to paint.

  • Use sandpaper to gently roughen the surface.
  • Apply Angelus Leather Preparer and Deglazer to further ready the surface.
  • Then apply a clear Adhesion Promoter Primer made for vinyl, rubber, and other plastic surfaces.
  • Once thats done, you can paint vinyl surfaces with Angelus Leather Paints.

    To Protect Soles

    Vinyl tape works best for covering curved surfaces but you can also use painters tape.

    For Detail Work

    Don’t Miss: Is Dhgate A Real Site

    What Machines Are Needed To Manufacture Sneakers

    What shoe factory equipment do I need to open a real shoe factory? Im going to walk you through a mass production shoe factory and detail all the shoe factory equipment you will need to do it right. If you are looking for hand tools for shoemaking Im going to show you what you need to make a standard die-cut cold cemented sneaker. This is a simple shoe made with only die-cut parts. The outsole is a one-piece rubber cupsole with a die-cut midsole inside and channel stitching.

    First, modern shoe manufacturing relies heavily on sub-contracted factories for many specialized operations. For example, the shoe factory technicians developed the outsole designs, but the outsole tooling is produced elsewhere, with the rubber parts also purchased somewhere else from a company that specializes in rubber pressing. The shoe factory then controls the components to ensure the uppers and outsoles all fit together correctly.

    These 5 Products Will Help You Become A Master Sneaker Customizer

    How To Customize Shoes – Supplies Needed!!

    Customizing has transformed from a niche market into a big part of the sneaker culture over the past few years. The game is littered with DIY professionals who sell their services, along with members of a newer, more rebellious subculture who take a product and make it theirs by giving it a unique work-over.

    Its fair to say that most people want to break free and add individuality and exclusivity to their kicks, however, some might not know where to start. Recently, the sharpie-custom trend has come back around thanks to .

    To make it easier for you, weve rounded up a few techniques you can use to give your sneakers a personal touch and complemented that with a list of products that will elevate your sneaker customizing skills.

    Peep the list below, which includes inspiration from some of the best on Instagram.


    The best paint for customising is Angelus acrylic paint, as the brand is known for being the longest lasting, most durable and incredibly vibrant on various materials.

    Angelus Acrylic

    Fine brushes

    Using the correct brush will make a huge difference to the end result, keeping your lines clean and precise. A strong and high quality brush is essential when working with acrylic paint.

    Fine Paint Brush Set

    Reconstructing tools

    Paraframe II Knife

    Embroidery pen

    Embroidery Tool


    Airbrushing is another clean and easy way to customize your sneakers. Pairing the technique with a stencil can make for some beautiful designs.

    Also Check: How To Get Bleach Stains Out Of White Shoes

    How To Sell Custom Shoes Online

    Selling custom shoes is as easy as 1, 2, 3! Start a successful online business by selling custom shoes online with the help of Printify. We offer seamless integrations with the worlds leading eCommerce platforms all you need to do is to create an online store, connect it with Printify, and add your products. And then its time for the fun part marketing and expanding while Printify takes care of all personalized flip flop orders.

    The first step to sell your designs is to choose the most suitable eCommerce platform for you to sell your custom canvas prints. Many artists choose Etsy as it is the best-known online marketplace for custom-made goodies, and its relatively easy to gain quick exposure.

    Shopify is a go-to platform for merchants whod like to own their sites owning your shop allows you to brand yourself a little bit more creatively. Shopify allows you to have your own domain name, which looks more professional, as well as access to advanced metrics and analysis. Plus, Shopify is the largest online eCommerce platform in the world.

    Chose Wix, if you would like a custom-looking site It offers more than five hundred designer-made templates that give you a mixture of options when it comes to designing your eCommerce store. Use the site editor to customize your chosen template to make sure your site looks as uniquely yours as possible.

    How To Paint Your Sneakers: Surface Preparation

    Every sneaker comes out of the box with a factory finish a clear coating used to protect the color and material of the shoe but this layer will also prevent your paint from bonding properly with the surface of the uppers. To prevent your paint from cracking or peeling the first time you wear it, you must remove the factory finish first.

  • Soak your cloth in acetone. Dont use too much: you dont want the cloth to be sodden.

  • Wipe the acetone-soaked cloth on any areas of the shoe that youll be painting.

  • On some shoes, a paste-like residue may form on the surface of the sneaker. Dont worry this is just the factory finish coming off.

  • Keep wiping until the surface of the uppers feels smooth.

  • TIP: If you dont have a spare cloth, cotton wool balls will do.

    Read Also: How Many Miles Running Shoes Replace

    Angelus Leather Paint Set Of 12 1 Oz:

    • Set of Angelus Leather paint in twelve colors
    • Ideal for atheltic shoes – boots- jackets – purses – tack
    • Non-Toxic 1 oz jars
    • Angelus Acrylic Leather Standard Paint
    • Made in the USA

    Prices pulled from the Amazon Product Advertising API on:

    Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.

    This brand is over a century old, and its still selling strongly to this the only reason is that its one of the best solutions in the market. You can buy the whole set if you want to or just focus on one color.


    These days, most of the formulas found in products are harmful, but not this product. With safe ingredients used in the formula, you can use this paint however you want.


    Judging from the reviews, the paint is on the customers items for years without any sign of decay. This product will be sure to keep your shoes slick and shining for years to come.

    What we liked:

    Prices pulled from the Amazon Product Advertising API on:

    Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.



    What we liked:

    • Wide variety of colors to use from.
    • Three free brushes.

    - Advertisment -

    Popular Articles

    - Advertisment -