Friday, March 22, 2024
HomeBootsSteel Toe Boots On Sale

Steel Toe Boots On Sale

- Advertisment -

Additional Safety Footwear From Rocky Boots

Boot sale! Steel-toe Carolina logger boots for sale FREE SOCKS!!

If you are looking for protective toe footwear but want to go with an alternative to steel toe boots, we have other great options to choose from. We have a great collection of composite toe boots that also meet or exceed ASTMF2413 standards, and our Workknit LX collection has several great lightweight alloy toe options. You can also shop for a pair of puncture resistant shoes to better protect the bottom of your feet or a pair of met guard boots to fullyprotect the top of your feet.

Mens Steel Toe Work Boots And Shoes

Cinder blocks, forklifts, nails. Many workplaces have hazards that can injure your feet. Thats where steel toe work boots come in. Theyre original in safety footwear, designed to protect the foot from falling objects or compression. Though today there are other options, steel toe boots are still the industry standard and are required on many job sites. Which one is right for you?

How Do I Make Sure To Get The Right Size

To measure your feet:

  • Get a blank piece of paper, a pencil and a tape measure.
  • Stand with one foot on the piece of paper, and have most of your weight on your foot to simulate walking.
  • Holding the pencil perfectly vertical and perpendicular to the paper, mark a line at the back of your heel and at the tip of your longest toe. Also mark a line along each side of the widest part of your foot.
  • Measure length and width to the nearest 16th inch and subtract .20 to .25 inches, or .50 centimetres, to account for the width of the pencil.
  • Find your corresponding size in the charts below.
  • A couple of tips to get the perfect fit:

    • Measure your feet later in the day as feet normally swell and can become up to half a size bigger in the evening.
    • Measure both feet and use the measurements of the biggest foot. Many people have feet that are different sizes.
    • Wear the same type of socks you will generally be wearing on the job when you measure your feet.

    Here are some general guidelines to assess fit once youve received your new boots:

    • Try on new boots towards the end of the day.
    • Walk around in a clean environment for a couple of hours to make sure the boots are comfortable.
    • Try boots on both feet, as many people have feet that are different sizes.
    • Boots should fit snugly around the heel and ankle when laced.
    • The inner side of the boot should be straight from the heel to the end of the big toe.
    • The boot should grip the heel firmly.

    Read Also: What Kind Of Shoes Are Good For Diabetics

    Men’s Shoe Size Chart

    121-127

    Hint: For the most accurate results, measure yourself in your undergarments.

    • Neck: Measure around the base of your neck, inserting your forefinger between the tape and your neck to allow ease in fit.
    • Chest: Measure around the fullest part of your chest, keeping tape firmly under your armpits and around your shoulder blades.
    • Waist: Measure around your waist, slightly below your natural waist, where you normally wear your pants. Insert your forefinger between the tape and your body to allow ease in fit.
    • Sleeve length: Bend your arm slightly. Measure from centre back neck, across your shoulder, down to your elbow, down to your wrist.
    • Hip: Measure around the fullest part of your hips, inserting your forefinger between the tape and your hip to allow ease in fit.
    • Inseam: Measure a similar pant that fits you well. Measure along the inseam, from the crotch seam to the bottom of the hem.

    Why Steel Toe Boots

    Danner Stronghold Waterproof Composite Toe Work Boots for Ladies(WOMEN ...

    They meet OSHA requirements.

    Many jobsites require steel toe boots to meet job-safety standards. Our safety footwear is tested to and exceeds the ASTM F2413-11 testing standards, meaning they can handle up to 75 pounds of impact, and up to 2,500 pounds of compression.

    They deliver heavy-duty protection from falling debris.

    If you work on a construction site where falling bricks, lumber, tools, or heavy equipment tend to go with the territory, then steel toe boots might be just what you need. Steel toe boots can help prevent falling objects from taking out your toes. They are like a hard hat for your feet.

    They help you avoid slips and falls.

    Our steel toe boots have an oil- and slip-resistant outsole to help prevent the foot and ankle injuries that can occur when youre climbing ladders or scaffolding, or working on uneven ground in all kinds of weather.

    They are durable.

    Steel toe boots provide maximum comfort and stand up to the wear and tear you inflict on your boots day in and day out. So if your job is rugged and the conditions are challenging, a steel toe boot can be your best ally.

    Also Check: How Many Miles Per Running Shoes

    Which Steel Toe Boot Is For Me

    For serious protection in a boot with a hiking-inspired look and feel, choose the mens Detroit XT Boot or the womens Detroit XT Boot. A stability plate provides support for lateral movement and locks your heel firmly in place. The removable insole delivers arch support for long-lasting comfort and less-tired feet. This boot comes in a version with a lightweight, flexible metatarsal guard to protect the top of the foot and one with an electrostatic dissipative outsole that helps reduce static electricity. The womens Detroit XT Boot is built on a womens-specific last, so its designed to fit just right.

    I have been wearing the Detroit XT steel toe boot everyday for two years doing farm work. I find them to be extremely comfortable for all day usage. We have sometimes had to walk through animal waste which has not affected the soles . I will definitely purchase again. Dale T.

    From road-paving crews to steel workers to park rangers, hard-working folks swear by the mens Mt. Vernon Boot. Direct-attach construction makes it a versatile choice for working outside at a construction site or inside a warehouse with cement floors. The reliable do-it-all boot is available in 6 and 8 heights or as a 6 boot with a metatarsal guard. Plus its part of the American Built collection, which is built in Portland, Oregon, using responsibly-sourced materials from around the world. If youre looking for a similar boot that comes in a lower cut, choose the mens Braddock Boot.

    Waterproof Steel Toe Work Boots

    I work outside in all kinds of weather.

    Because work doesnt stop when it rains, waterproof boots are essential. KEEN Utility boots made with a KEEN.DRY waterproof, breathable membrane shrug off the rain to keep you working efficiently through it all. The men’s Pittsburgh waterproof boot adds a KEEN KEY-TECH full-length interlocking torsion plate for multidirectional support and forefoot protection against rocks and stones.

    As an arborist who climbs, but also rotates through the other duties , these have been a very versatile boot. I find them to be very comfortable, so I keep coming back to KEEN! When you have your boots on for 10-12 hours and your feet are not really screaming to take the boots off at the end of the day, you know that you have a winner. Michael

    Landscapers working in the hot sun and warehouse workers moving boxes in a stuffy warehouse will appreciate the moisture-wicking lining and natural odor protection of the men’s Lansing Mid waterproof boot. Reflective webbing helps you stand out in low-light conditions.

    I walk close to six miles a day on a warehouse floor, which has ruined a couple of pairs of steel toe shoes. So far the Lansing are holding up perfectly while breathing well, protecting my foot, and also handling ice and snow quite well! No water has gotten in the shoe. These are work shoes that look and feel like hiking boots, and I couldn’t be happier. Bis

    Also Check: Where To Sell Fake Shoes

    Learn More About Men’s Work Boots

    Selection

    Men’s Work Boots for Tough Jobs

    High-quality men’s work boots are essential for staying safe and comfortable while at work. When you’re shopping for a new pair of work boots, keep the following factors in mind:

    • What type of toe protection do you need? Some jobs may not require a boot with a reinforced toe box, while others necessitate a steel or composite toed boot. Steel toe boots are a classic choice, providing excellent protection against falling objects.
    • Many of today’s reinforced boots feature a composite toe box, which can result in a lighter, more flexible boot with improved insulation in cold weather.

    You don’t have to sacrifice style for the sake of safety. DICK’S Sporting Goods carries an exceptional variety of men’s work boot options, such as western-style boots, hiking-style boots, tactical boots, Wellington boots and other popular designs, all featuring top-quality materials and comfortable, supportive soles.

    Choose from hundreds of the best work boots for men from trusted brands including:

    Rugged Steel Toe Work Boots

    Ariat Steel Toe WorkHog Boots EXTENDED TEST!

    I work in harsh conditions.

    For boots that work as hard as you do in tough situations, we recommend the men’s Milwaukee waterproof boot. Whether youre a site manager or a heavy equipment operator, you can depend on its all-day wearability. Abrasion-resistant Tough-Tec leather stands up to the demands of the job. A KEEN.DRY waterproof, breathable membrane ensures you can handle rainy days and wet ground with ease.

    I am a construction superintendent for a pipeline crew and spend at least 10 hours a day on my feet and have arthritis in both feet. As soon as I tried these boots, I was very impressed with the level of comfort. I spend my day walking through mud, water, and over asphalt and concrete and am impressed with the overall quality of these boots. Could not be more pleased. James W.

    Bought a pair of these when I started a new oil field job. Wore them for two years day in and day out. Summer heat and bitter winter here in Wyoming can be extreme. Loved these boots for the comfort and especially the durability. Chris

    I work highway construction and paving, 16-hour days. With these boots, my feet never get tired or sore. Ive tried lots of boots in 10 years of construction and none come close to the comfort of these. I wear them for everything outside of work as well. Ben

    You May Like: How To Get Odor From Shoes

    Keep Your Feet Protected In Rocky Steel Toe Work Boots

    Keeping your feet safe on the job is a top priority, and thats why Rocky steel toe boots are built with safety and all-day comfort in mind. All our steel toe boots meet ASTM 2413 standards for toe protection and meet electricalhazard standards as well. Whether you choose a pair of our steel toe work, western, or public service boots you can rest assured that your feet will be protected.

    Mens Steel Toe Boots For Any Jobsite

    No matter what other safety or comfort features youre looking for in a steel toe boot Georgia Boot has you covered. Our ASTM F2413 compliant steel toe work boots are built with both safety and comfort in mind. Thats why manyof our steel toe boots are built with features like steel shanks for stability, waterproofing to keep you dry, and oil and slip resistant outsoles to keep you on your feet. If boots with steel toes arent enough for your job, several of our steeltoe boots also offer metatarsal guards to protect further up your feet.

    We design our steel toe work boots to meet ASTM footwear standard requirements with a focus on versatility and style. The full-grain upper of your work boots needs to be rugged and masculine-looking while also durable enoughto hold up on the job site. The Georgia boots steel toe is engineered to prevent injury to your feet from falling objects or compression from heavy loads. Browse our collection of mens steel toe boots below and find your next all-daysteel toe work boot.

    Don’t Miss: Which Hoka Shoe Is Best For Me

    RELATED ARTICLES
    - Advertisment -

    Popular Articles

    - Advertisment -