Tuesday, September 27, 2022
HomeBootsKeen Work Boots Steel Toe

Keen Work Boots Steel Toe

- Advertisment -

Keen Utility Boots & Shoes

KEEN Mt Vernon Steel Toe Work Boot review

Keen Utility is one of the top brands for men and women who want a workboot that lasts. The brand began by making sporty sandals and comfy hiking boots. Keen workboots followed a few years later. The soles take advantage of all the comfort features found in hiking footwear and add more support to help you get through your workday. Keen women steel toe workboots are especially prized for their safety features and all-day comfort.

Are Keen Lansing Steel Toe Boots Waterproof Or Not

I always test my work boots to see if they really are waterproof.

We didnt get any rain in the last few weeks in my area so I couldnt test them on-site by walking through a few puddles but I have tested them at home.

The test consists of submerging the boots in a container with water at two different heights.

How Tall Are These Keen Lansing Mid Safety Boots

As Ive mentioned at the beginning of the article I was surprised to see how low the boots are.

Thats simply because many stores out there put in their description that the boot is 6 tall and I couldnt really appreciate the height of the boot just by looking at a few pics.

The whole boot is about 5.10 inches tall but if you rest the heel the upper of these work boots is about 3.22 inches tall.

So if youre after a pair of good low-cut work boots these are a good option.

Recommended Reading: What Are The Red Bottom Shoes Called

Keen Pittsburgh Mens Steel Toe Safety Boots

The rating of this product is 0 out of 5

  • A proprietary waterproof, breathable membrane that lets vapor out without letting water in.
  • Full-length TPU stability plate fits into the midsole of the shoe like a key, helping to provide heel stability, medial and lateral support, forefoot stone bruising protection.
  • LEFT AND RIGHT ASYMMETRICAL SAFETY TOE
  • Uniquely anatomically correct steel toe designs provide a roomier toe box and maximum comfort.
  • Meets ASTM F2412-11 and F2413-11 I/75 and C/75 Standards.

My Job Is Tough And The Terrain Is Rugged I Need A Heavy

Keen Leavenworth Steel Toe Internal Met Guard Waterproof Work Boot ...

You may be a heavy machine operator, a welder, or a utility worker. You may have to climb ladders or scaffolding, or be outside in all weather on uneven terrain. To handle the most challenging work conditions, we recommend the mens Milwaukee Boot. Its made of water- and abrasion-resistant leather with an oil- and slip-resistant outsole and a steel toe for protection. . Durable Goodyear welt construction provides stability on rocky ground. These boots are heavier than some others, but if burly is what youre looking for, these are your boots.

I am a radiant heat service tech who also on occasion replaces boilers and tanks. Most of my work is in doors, but I live in Wa. state, so getting equipment in and out of the van can be a wet experience. I’ve been wearing Milwaukee 6″ for 5 years, and they always fit perfectly and hold up well to constantly being on my feet. Theyre terrific boots. Jesse

If warmth is your top priority, check out the mens Dover Boot from our American Built collection. Its available in an 8 height thats insulated with 600g of KEEN.WARM insulation for comfort in cold temperatures.

You May Like: Are Indestructible Shoes Ansi Approved

Why Steel Toe Boots

They meet OSHA requirements.

Many jobsites require steel toe boots to meet job-safety standards. Our safety footwear is tested to and exceeds the ASTM F2413-11 testing standards, meaning they can handle up to 75 pounds of impact, and up to 2,500 pounds of compression.

They deliver heavy-duty protection from falling debris.

If you work on a construction site where falling bricks, lumber, tools, or heavy equipment tend to go with the territory, then steel toe boots might be just what you need. Steel toe boots can help prevent falling objects from taking out your toes. They are like a hard hat for your feet.

They help you avoid slips and falls.

Our steel toe boots have an oil- and slip-resistant outsole to help prevent the foot and ankle injuries that can occur when youre climbing ladders or scaffolding, or working on uneven ground in all kinds of weather.

They are durable.

Steel toe boots provide maximum comfort and stand up to the wear and tear you inflict on your boots day in and day out. So if your job is rugged and the conditions are challenging, a steel toe boot can be your best ally.

Verdict: Are Keen Lansing Work Boots Worth The Money

If youre looking for a boot thats mixing the lightweight and breathability of a hiking boot with the safety features of a work boot then these KEEN Utility work boots are a great option.

Theyre an excellent pair of work boots for those of you working indoors and also for a few outdoor jobs.

Avoid buying these boots if you are at the airport or any place where youll have to go through a metal detector. The steel toe cap will set off the metal detectors and youll have to go through all that process of getting the boots off, manual search, etc, etc. Annoying

So far Im very happy with the money Ive spent on my KEEN work boots and I cant find really something bad to say about them thus far.

Owners Review

A great mid-height work boot that puts together the comfortability of a hiking boot and the safety features of a work boot. For me was very comfy right out of the box, quite roomy and no breaking-in period was required.

Also Check: What Is Standard Shoe Width

Men’s Work Boots & Shoes

Our men’s work boots and shoes by KEEN Utility are built for performance, protection and comfort, with serious safety features and cushioning in all the right places. With free ground shipping, free and easy returns, and a 1-year warranty-and-replacement policy that covers manufacturing defects and materials flaws, try on a pair today and become a KEEN fan for life!

Breathable Steel Toe Work Shoes

Keen Pittsburgh Steel Toe Work Boots Review (Keen Utility Boots Review)

I walk all day and my feet sweat a lot. Help!

If youre looking for safety footwear with the breathability of a sandal and the protection of a leather work shoe, the womens Atlanta Cool II ESD shoe is a great choice. A sandal-inspired work shoe thats ideal for light industrial or warehouse work, it has a ventilated leather and mesh upper that helps keep feet cool. A responsive KEEN.ReGEN midsole provides 50% more energy return with every step than standard EVA foam, and the Electro Static Dissipative -rated outsole offers protection from excessive static electricity when your job requires it.

I’m a machinist, so I’m on my feet for 10 hours a day on hard concrete. My old shoes would make my feet hot and sore. These I can barely tell I have on! You can’t even tell they’re steel toe when wearing them either. Super super comfortable shoes. Malari S.

Love them!! I walked all day in the warehouse theyre perfect for summer weather and concrete floors. Patricia

If steel toe boots arent right for you, take a look at our aluminum toe, carbon-fiber toe, or soft toe work boot options. With so many work boots and shoes to choose from, theres a pair of KEEN Utility work boots for you.

Read Buying Guide +Collapse –

You May Like: Where Are Xero Shoes Made

Which Steel Toe Boot Is For Me

For serious protection in a boot with a hiking-inspired look and feel, choose the mens Detroit XT Boot or the womens Detroit XT Boot. A stability plate provides support for lateral movement and locks your heel firmly in place. The removable insole delivers arch support for long-lasting comfort and less-tired feet. This boot comes in a version with a lightweight, flexible metatarsal guard to protect the top of the foot and one with an electrostatic dissipative outsole that helps reduce static electricity. The womens Detroit XT Boot is built on a womens-specific last, so its designed to fit just right.

I have been wearing the Detroit XT steel toe boot everyday for two years doing farm work. I find them to be extremely comfortable for all day usage. We have sometimes had to walk through animal waste which has not affected the soles . I will definitely purchase again. Dale T.

From road-paving crews to steel workers to park rangers, hard-working folks swear by the mens Mt. Vernon Boot. Direct-attach construction makes it a versatile choice for working outside at a construction site or inside a warehouse with cement floors. The reliable do-it-all boot is available in 6 and 8 heights or as a 6 boot with a metatarsal guard. Plus its part of the American Built collection, which is built in Portland, Oregon, using responsibly-sourced materials from around the world. If youre looking for a similar boot that comes in a lower cut, choose the mens Braddock Boot.

Men’s Shoe Size Chart

121-127

Hint: For the most accurate results, measure yourself in your undergarments.

  • Neck: Measure around the base of your neck, inserting your forefinger between the tape and your neck to allow ease in fit.
  • Chest: Measure around the fullest part of your chest, keeping tape firmly under your armpits and around your shoulder blades.
  • Waist: Measure around your waist, slightly below your natural waist, where you normally wear your pants. Insert your forefinger between the tape and your body to allow ease in fit.
  • Sleeve length: Bend your arm slightly. Measure from centre back neck, across your shoulder, down to your elbow, down to your wrist.
  • Hip: Measure around the fullest part of your hips, inserting your forefinger between the tape and your hip to allow ease in fit.
  • Inseam: Measure a similar pant that fits you well. Measure along the inseam, from the crotch seam to the bottom of the hem.

Read Also: Are Brooks Shoes Worth The Money

Waterproof Steel Toe Work Boots

I work outside in all kinds of weather.

Because work doesnt stop when it rains, waterproof boots are essential. KEEN Utility boots made with a KEEN.DRY waterproof, breathable membrane shrug off the rain to keep you working efficiently through it all. The men’s Pittsburgh waterproof boot adds a KEEN KEY-TECH full-length interlocking torsion plate for multidirectional support and forefoot protection against rocks and stones.

As an arborist who climbs, but also rotates through the other duties , these have been a very versatile boot. I find them to be very comfortable, so I keep coming back to KEEN! When you have your boots on for 10-12 hours and your feet are not really screaming to take the boots off at the end of the day, you know that you have a winner. Michael

Landscapers working in the hot sun and warehouse workers moving boxes in a stuffy warehouse will appreciate the moisture-wicking lining and natural odor protection of the men’s Lansing Mid waterproof boot. Reflective webbing helps you stand out in low-light conditions.

I walk close to six miles a day on a warehouse floor, which has ruined a couple of pairs of steel toe shoes. So far the Lansing are holding up perfectly while breathing well, protecting my foot, and also handling ice and snow quite well! No water has gotten in the shoe. These are work shoes that look and feel like hiking boots, and I couldn’t be happier. Bis

Update: 1 Month Of Wearing These Keen Lansing

Keen Men

So are these KEEN Lansing good work boots to work in summer? My answer is yes, they are a great option.

Weve had a couple of windy days over here and I could really feel the wind going through those breathable panels straight into my socks. Great feeling!

When is hot you cant feel the air going in and out of the boots but overall I felt that my feet were much fresher than when I was wearing my Blundstone BL990 .

Nothing really much to add after a month. Im still really happy with them! Ill see you in a few months for a 6 months update.

Team Members Working On This Page

Read Also: What Type Of Shoe Do I Need

Im Constantly Kneeling Bending And Crawling Do You Make A Flexible Boot

We say the mens Portland Boot bends where other boots break. Thats because it has KEEN.BELLOWS FLEX technology that creates flexibility in the forefoot so you can crouch, bend, squat, or kneel three times easier, making work below the knee a breeze. Add a lightweight, air-injected PU midsole for optimal comfort and youre set from clock-in to clock-out.

Thanks KEEN for making the most comfortable and protected toe workboot made in the USA I have ever worn. This boot is light, flexible and has zero break-in time. The bellows feature works perfectly. RZ

Keen Utility Brief Company History

Although beginning as a revolutionary sandal manufacturer, Keen has branched out into various styles, including work boots.

Keens design team set the company apart from the rest with their unique approach to the design of shoes. They mixed both their extensive knowledge of shoes and research and engineering to create some of the most comfortable shoes on the market.

Within the industrial line, the boots are soft-toed, steel-toed or composite-toed. The boots may look like hiking shoes, but they offer foot protection comparable to the other leading companies in the industry. Boots within Keen Industrial include:

  • The Pittsburgh
  • The Portland
  • The Detroit Mid
  • The Cleveland

A number of technologies are employed in each style. The Keen grip ensures you hold your ground with its slip and oil resistant outsoles, which meet, sometimes exceeding, the American Society for Testing and Materials F1677-96 MARK II non-slip standards.

The left and right asymmetrical steel toe provides a roomier toe box with its anatomically correct steel-toe design. It meets ASTM F2412-05 and F2413-05 I/75 and C/75 standards. The Keen waterproofing system has a waterproof, breathable membrane that lets vapor out without letting water in.

Most importantly, all of the boots have the metatomical footbed design, which offers superior arch support and cradles the contours of the foot. Anatomically engineered, the footbed makes wearing work boots more bearable.

Read Also: Are Brooks Running Shoes Vegan

Are Keen Work Boots Comfortable

KEEN Utility is one of the only work boot brands that brings the comfort and fit of a hiking boot into every single one of our work boots. Theres a difference between the average foot form that most work boot brands use and our hiking-inspired platform. A more natural, snug fit in the heel and a more spacious, intuitive toe box creates a one-of-a-kind work boot. Try one on for yourself.

Your foot is comfortably pulled into the naturally-structured heel cup and fully supported, reducing heel abrasion, hot spots and blisters.

KEEN Utilitys forefoot is built wide to allow for a more natural flexion from heel strike to toe-off. The less constricted, more natural position and freedom of movement in the toes means more productive work.

First Impressions Of The Keen Lansing Work Boots

Keen Utility Lansing Review (Keen Steel Toe Boots Review)

My first impression of the boot is that is much lower than

what I was expecting. If you read the product description on many websites out there, youll see it says the boots are 6inch tall.

But these are a couple of inches shorter than that. Heres a comparison with my Thorogood moc toe 6 steel toe boot so you can appreciate the difference better.

In all fairness, the product description says MID which not everybody might know right away but mid in this context stands for middle.

So theyre not over the ankle but theyre not a lot under it either. Theyre in the middle.

By the way, KEEN doesnt make an over-the-ankle version of these boots . The only other version of these boots comes with a 3 tall shaft and that really shouldnt be considered a boot. Thats a safety work shoe and you can find more details about it here.

Other than that, I really liked the boot right out of the box, it seems to be quite flexible and well try that later on when Ill take them to work. Ill talk more about it below. Also, I cant wait to see if the ventilation panels do the job or not of keeping the boot fresh and breathable.

Also Check: Where Can I Buy Teva Shoes

Are They Lightweight How Much Do They Weigh

I dont really know what lightweight means to you but to me, these KEEN Lansing boots are quite lightweight.

Ill leave you an image below with how much each boot weighs so you can make yourself an idea and decide if this is heavy for you or not.

Keen Lansing weighs 714grams or 1lb and 92oz per boot!

They are shorter than other work boots, they have fabric eyelets instead of iron. Also, they use less leather in the construction of the upper. The shank is made out of TPU instead of steel

all this is to say that KEEN Lansing work boots are lightweight when compared to my previous work boots. You can read reviews of my other work boots here.

Reviewing The Keen Utility Lansing

Overall, a great steel-toe work boot to work on hotter days with a very good anti-slippery outsole that sticks to most of the surfaces Ive tried them on. Theyre comfy and ready to go straight out of the box.

After reading hundreds of reviews Ive decided to get my hands on these KEEN Lansing mid-height work boots and give them a try.

My Lansing boots are steel-toed work boots since I work in construction and I need to wear safety work boots. I couldnt find a version of these KEEN Lansing that come with a soft toe cap so Im just going to assume there isnt one.

Today Id love to share with you my personal experience with these KEEN work boots in case youre looking to buy a pair for yourself.

Also, Ill do an unboxing, and take some measurements of the different parts of the boots and much more. I hope its helpful.

Buckle up cause its quite a long review. For your convenience, Ive created a menu for this page thats helpful to jump to a specific section. Just click on the Whats inside below to open it.

Lets go!

Read Also: Are Indestructible Shoes Any Good

RELATED ARTICLES
- Advertisment -

Popular Articles

How To Lace Running Shoes

Where To Buy Yellow Shoes

- Advertisment -